Giving shock to battery

How to check mobile batteries


We can do the following work by using Digtial DC Power Suplly machine
  • 1Battery checking
  • 2Giving shock to the batteries
  • 3Giving power supply to the battries when battery is not present
  • 4Charging the batteries
  • 5This machine gives 1.5 to 15 volt DC power supply we can use it for anything
air machine
1. When we check battery by multimeter and battery shows 0.00 volt then we can use this machine to give shock by 15 volt.

If battery shows 0.00 volt means battery is deeply discharged. 

2. When we give shock to the battery and digital power supply machine shows some voltages, for example 1.5 volt means battery is usable. 

3. If digital power supply machine shows 0.00 volt means battery is not usable. 

4. We can also use this digital power supply machine to give power supply to the mobile phone, 

in that case we need to set digital power supply machine to 3.6 volt.
Location: Kothagudem, Khammam, Telangana 507101, India

Comments

Post a Comment

Popular posts from this blog

Mobile repairing tools

Image
Hot Air Machine It is also known as SMD Hot Air Rework Station. It is used to Sold and Desold Chip components such as SMD IC, BGA IC etc. We can also adjust air pressure and temperature according to the requirement. There are two knobs for the purpose. DC Solder Iron It is used to do micro soldering work like solding of capacitors, LED, MIKE, Speakers etc. It is operated on DC voltage that's why it is known as DC iron. 25 Watt AC Iron It is used to sold or desold electronic parts and components. It is operated on AC Voltage. Solder wire It is used to soldering of various electroinic components on PCB. Solder wire melts by the iron and we can apply this melt solder wire wherever required Solding paste/Flux It is used to do fine solding. Forchef It is used to pick and place various electronic components while working on PCB. Toolkit It is used to open various types of screws. It has many pieces. ISO Propyl Alcohal ...
Read more

Disk management system

Image
How to format a memory card using disk management tool - If you can’t format your Memory card/USB drive/USB pen drive using My computer – right click – format option, then you can do the same by using windows Disk Management tool. Here is how you can do it.  warning : Always take backup of your important data before formatting any drive/memory card/usb pen drive #1: Right Click My Computer and then select Manage from the menu. #2: Computer Management windows will be appeared on the screen.  #3: Click Disk Management option as shown below  #4: All the drives will be shown in the right pane of the window. Right click the desired drive then select format.. option from the menu.  #5: One more window will be appeared on the screen. There you may type Volume Label for your memory card. It’s nothing but a name for the memory card. Also you can select the desired file system for the memory card such as FAT or FAT32 and then click OK button to start the formatting pro...
Read more