Mobile repairing tools
Hot Air Machine
It is also known as SMD Hot Air Rework Station.It is used to Sold and Desold Chip components such as SMD IC, BGA IC etc.
We can also adjust air pressure and temperature according to the requirement.
There are two knobs for the purpose.
DC Solder Iron
It is used to do micro soldering work like solding of capacitors, LED, MIKE, Speakers etc.
It is operated on DC voltage that's why it is known as DC iron.
It is operated on DC voltage that's why it is known as DC iron.
25 Watt AC Iron
It is used to sold or desold electronic parts and components.
It is operated on AC Voltage.
It is operated on AC Voltage.
Solder wire
It is used to soldering of various electroinic components on PCB.
Solder wire melts by the iron and we can apply this melt solder wire wherever required
Solder wire melts by the iron and we can apply this melt solder wire wherever required
Solding paste/Flux
It is used to do fine solding.
Forchef
It is used to pick and place various electronic components while working on PCB.
Toolkit
It is used to open various types of screws. It has many pieces.
ISO Propyl Alcohal
To clean PCB, this solution is used, if there is a dirt or carbon on PCB.
It is also used to clean various contact points such as
mike, speaker, vibtrator contact points when there is carbon or dirt on there.
It is also used to clean various contact points such as
mike, speaker, vibtrator contact points when there is carbon or dirt on there.
BGA Kit
It is used to reball BGA ICs
PPD
It is used to reball BGA ICs
Vibrator Machine
It is used to clearn the PCB
Flasher Box
Different kind of flasher box are available in the market for different mobile phone such as
UFS, Spiderman, Jaff, Infinity box, ATF Box , Z3X Flasher.
Flasher box are used to solve various types of software problems in mobile phone such as
formatting a mobile phone, hard reset, unlocking etc.
UFS, Spiderman, Jaff, Infinity box, ATF Box , Z3X Flasher.
Flasher box are used to solve various types of software problems in mobile phone such as
formatting a mobile phone, hard reset, unlocking etc.
AC DC Power Machine
There are three main uses of this machine are :
1. Giving shock to the battery
2. DC output can be used for various purpose
3. When there is no battery available we can give power supply to the mobile phone
by this machine that is 3.6 volt.
1. Giving shock to the battery
2. DC output can be used for various purpose
3. When there is no battery available we can give power supply to the mobile phone
by this machine that is 3.6 volt.
Magnifier Lamp
It is used to see magnified image of any parts on the PCB that is too small.
Jumper Wire
It is made of copper.
It is very thin insulated wire.
When there is broken internal track in mobile PCB we can then make a jumper there.
It is very thin insulated wire.
When there is broken internal track in mobile PCB we can then make a jumper there.
Iron Stand
Iron stand is used to hold the iron.
Mobile Opner
It is used to open different kind of mobile phone easily.
It helps to do so.
It helps to do so.
Desolding Wire
By using this we can remove extra/unwanted solder from the PCB
PCB Holder
PCB holder is used to hold the PCB while working on PCB so that it won't move here and there.
By using this we can easily work on PCB like solding, changing IC's etc.
By using this we can easily work on PCB like solding, changing IC's etc.
Multi Meter
It has many uses, that is why it is known as multimeter.
General uses are checking various electronic components,
DC Volt Checking, AC Volt Checking, Checking DC Current and AC Current.
General uses are checking various electronic components,
DC Volt Checking, AC Volt Checking, Checking DC Current and AC Current.
Comments
Post a Comment